16 replies to this topic

[Spirit Flyer]

Hello,

I am interested in buying the 767. Are the windows clear or do they darken or dim the scenery outside? How strong are the window reflections, if any? Thank you for your answer.

Spirit Flyer

[Albert_Bouwman]

You can judge yourself:
http://www.youtube.c...arch_type=&aq=f

[Spirit Flyer]

You can judge yourself:
http://www.youtube.c...arch_type=&aq=f

Thank you sir, They look like fine videos and from what I can tell, show clear windows. However there are also these 767 screenshots ON CLS SCREENSHOT FORUMthat would tend to lead me to a completely different conclusion. Obviously either my eyes or the pictures do not indicate a clear (please excuse the pun) answer. Thank you kindly for clarity. I am already a CLS 747 customer than has unclear windows so I think it is a fair question and not intended to cause trouble or disrespect for your work.

Stephen

[Albert_Bouwman]

The changes is in the video card. Every card renders alpha layers differently. By changing the texture you can get most of it gone. Have a look at the 747 reply.

[Spirit Flyer]

The changes is in the video card. Every card renders alpha layers differently. By changing the texture you can get most of it gone. Have a look at the 747 reply.

Thank you. I applied the 747 window texture you provided (on the 747 thread) to the 747 and it cleared up the windows perfectly. How do I apply it to the 767? The windows on it are as contrasted out as the 747 were, if not a bit worse. Do I use the same 747 replacement texture you provided me and call it by a different (767) name? If so, which 767 texture would it replace?

By the way, is there anyway to remove the yellow screen blocking the left aft cockpit window?

Thank you for your help.

Stephen

[Albert_Bouwman]

Put the attached texture in the main TEXTURE folder of FS9.

Or in FSX, put this in the \SimObjects\Airplanes\CLS_767_textures folder.

Attached Files

•  CLS767_VC_10_l.bmp   341.4K   323 downloads

[higgi91]

just back the the tint if you still wondering;





Dan.

[Plexi1]

it is possible to get a completely clear window at night when lights are on, open the aircraft.cfg of each plane and change 2 lines in the [Lights] section, according to the following

for the 767-200

light.3 = 4, 73.500, 0.000, 3.000, CLS_Boeing_vclight, // Boeing Orange
//light.4 = 6, 70.000, 0.000, -8.350, CLS_taxi_light, // gear bay taxi light rays from taxi lights


for the 767-300

light.3 = 4, 83.000, 0.000, 3.000, CLS_Boeing_vclight, // Boeing Orange
//light.4 = 6, 80.000, 0.000, -8.350, CLS_taxi_light, // gear bay taxi light rays from taxi lights

now it should look like this

[Spirit Flyer]

Hi,

Is there anything new in regard to removing window tint in the 767? I will apply both the provided texture and the CFG file change. Thanks.

Stephen

[Plexi1]

have you tested how it is now with SP4 ?